Supermicro Server Board X10DRL-i

Supermicro Server Board X10DRL-i

8.260.000 ₫

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 512GB ECC DDR4 2133MHz; 8x DIMM sockets
4. 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8), 1 PCI-E 3.0 x16, 1 PCI-E 2.0 x4 (in x8)
5. Intel® i210 GbE LAN, 2 ports
6. Integrated IPMI 2.0 and KVM with Dedicated LAN
7. 10x SATA3 (6Gbps); RAID 0, 1, 5, 10
8. 4x USB 3.0 (2 rear, 2 via header); 5x USB 2.0 (2 rear, 2 via header,  1 Type A)

Product Description

Supermicro Server Board X10DRL-i

Product SKUs
MBD-X10DRL-i -O * Supermicro Server Board X10DRL-i (Standard Retail Pack)
MBD-X10DRL-i -B * Supermicro Server Board X10DRL-i (Bulk Pack)
Physical Stats
Form Factor * ATX
Dimensions * 12″ x 10″ (30.48cm x 25.4cm)
Processor/Cache
CPU * Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
* Dual Socket R3 (LGA 2011)
Cores / Cache * Up to 18 Cores / Up to 45MB Cache
System Bus * QPI up to 9.6 GT/s
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity * 8x 288-pin DDR4 DIMM sockets
* Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type * 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes * RDIMM: 32GB, 16GB, 8GB, 4GB
* LRDIMM: 64GB, 32GB
Memory Voltage * 1.2 V
Error Detection * Corrects single-bit errors
* Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset * Intel® C612 Express chipset
SATA * I-SATA 4 and I-SATA 5 support SATA DOM
* SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI * Support for Intelligent Platform Management Interface v.2.0
* IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
* ASPEED AST2400 BMC
Network Controllers * Intel® i210 Gigabit Ethernet controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
* 1x Realtek RTL8211E PHY (dedicated IPMI)
Video * ASPEED AST2400 BMC
Input / Output
SATA * 10x SATA3 (6Gbps) ports
LAN * 2x RJ45 Gigabit Ethernet LAN ports
* 1x RJ45 Dedicated IPMI LAN port
USB * 4x USB 3.0 ports (2 rear + 2 via header)
* 5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Video * 1x VGA port
Serial Port / Header * 2x Fast UART 16550 port / 1 Header
DOM * DOM (Disk on Module) power connector
TPM * 1x TPM 1.2 20-pin Header
Chassis (Optimized for X10DRL-i )
1U Chassis: SC113MFAC2-R606CB
SC813MFTQ-441CB
SC813MFTQ-R400CB
SC813MFTQ-R606CB
2U Chassis: SC213LT-600LPB
SC823TQ-653LPB
SC826TQ-R500LPB
3U / Mid-Tower Chassis: SC732D4F-903B
SC732I-500B
SC833T-653B
4U / Tower Chassis: SC842TQ-665B
SC842TQ-865B
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X10DRL-i
Model(s) * SYS-6018R-MT
* SYS-6018R-MTR
Expansion Slots
PCI-Express * 3 PCI-E 3.0 x8
* 1 PCI-E 3.0 x16
* 1 PCI-E 3.0 x4 (in x8)
* 1 PCI-E 2.0 x4 (in x8)
System BIOS
BIOS Type * 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features * Plug and Play (PnP)
* APM 1.2
* PCI 2.3
* ACPI 3.0 / 4.0
* USB Keyboard support
* SMBIOS 2.7.1
* UEFI 2.3.1
Management
Software * SuperDoctor® 5
* Intel® Node Manager 3.0
* Watch Dog
* IPMI 2.0
Power Configurations * ACPI Power Management
* Power-on mode for AC power recovery
PC Health Monitoring
Voltage * Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
* 5 Phase-switching voltage regulator
FAN * 8x 4-pin fan headers (up to 8 fans)
* 8x fans with tachometer monitoring
* Status monitor for speed control
* Pulse Width Modulated (PWM) fan connectors
Temperature * Monitoring for CPU and chassis environment
* CPU thermal trip support
* Thermal Control for 8x Fan Connectors
* Thermal Monitor 2 (TM2) support
* PECI
LED * CPU / System Overheat LED
* Suspend static indicator LED
* UID/Remote UID
Other Features * Chassis intrusion detection
* Chassis intrusion header
* RoHS, Halogen Free
* Dual Cooling Zones
Operating Environment
Operating Temperature Range 10°C – 35°C (50°F – 95°F)
Non-Operating Temperature Range -40°C – 70°C (-40°F – 158°F)
Operating Relative Humidity Range 8% – 90% (non-condensing)
Non-Operating Relative Humidity Range 5% – 95% (non-condensing)

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.